RESTORE 1 jpg - View of front and side panels removed

RESTORE 2 jpg.jpg - View with right side removed.  Two arrows to nylon screws and one to load cap jumper.

RESTORE 3 jpg.jpg

RESTORE 4 jpg.jpg - View of receive coax with exposed shield

RESTORE 5 jpg.jpg - Same as 4

RESTORE 6 jpg.jpg  - Wire routing in final compartment

RESTORE 7 jpg.JPG - Good solder fix for load coil

RESTORE 8 FEED THROUGH.jpg

RESTORE 9 FEED THROUGH BURN.jpg

RESTORE 10 HOT COIL.JPG

RESTORE 11 FINAL CAP2 JPG.jpg 

RESTORE 12 WIRES TOO CLOSE.JPG

RESTORE 13 WIRES TOO CLOSE.jpg