VFO Gear train and locations

I have removed the VFO to clean, lub, and adjust the gear train. This radio had excessive backlash and binds. Removing the VFO from the SR-2000 is fairly simple and while it's on the bench, you can clean the 500Kc and 1Kc dials and if they are too discolored or pealing, place a photo image that has been clear coated over them.
I have removed the VFO to clean, lub, and adjust the gear train. This radio had excessive backlash and binds. Removing the VFO from the SR-2000 is fairly simple and while it's on the bench, you can clean the 500Kc and 1Kc dials and if they are too discolored or pealing, place a photo image that has been clear coated over them.
img_1544031148_14876_1544031149_mod_280_210
img_1544031148_14877_1544031149_mod_280_210
This assembly is ready to be removed. Notice the three screws that have been removed. NOTE: Notice the dial shaft has the small gear still attached. The gear holds the ball bearing race and balls together as you remove the assembly. The rear end of that shaft has a small indentation that presses against a single ball that is in the shaft tunnel. make sure that ball is centered when the shaft is re-inserted. There is however a screw adjustment on the end of the bearing enclosure that can be removed to center the ball. To lubricate the gears and bearings USE ONLY CLOCK OIL NOT GREASE OR UNKNOWN STUFF. CLOCK oil is a synthetic oil composed of short string molecules and does not dry out or oxidize.
This assembly is ready to be removed. Notice the three screws that have been removed. NOTE: Notice the dial shaft has the small gear still attached. The gear holds the ball bearing race and balls together as you remove the assembly. The rear end of that shaft has a small indentation that presses against a single ball that is in the shaft tunnel. make sure that ball is centered when the shaft is re-inserted. There is however a screw adjustment on the end of the bearing enclosure that can be removed to center the ball. To lubricate the gears and bearings USE ONLY CLOCK OIL NOT GREASE OR UNKNOWN STUFF. CLOCK oil is a synthetic oil composed of short string molecules and does not dry out or oxidize.